Filter
Top Products
Maintenance
10 309523D
If RAC Spray Tip Clogs
1.
If spray tip clogs while spraying, stop spraying
immediately.
8.
If tip is still clogged:
WARNING
Read warnings, page 3.
2.
Engage trigger lock.
3.
Rotate RAC tip handle back 180° (arrow points
back).
4.
Disengage trigger lock.
5.
To remove clog, trigger gun into a pail or onto the
ground.
6.
Engage trigger lock.
TI1952A
7.
Rotate RAC tip handle (G) to spraying position
(arrow points forward).
a.
Engage trigger lock.
b.
Shut off sprayer and disconnect power
source.
c.
Open fluid drain valve to relieve pressure.
d.
Remove and clean GHD RAC spray tip.
G