Filter
Top Products
Circulation Kit
309852E 3
Circulation Kit
Remove fittings from elbows (A, B) at the pro-
portioner fluid manifold. Only used with 24697
For 246978: Screw reducing nipples (104) into
elbows. Connect one end of hoses (102) to
each nipple.
For 24E379 and 24D107: Connect elbows (105)
to the proportioner fluid manifold. Connect fitting
(106) to return tube. Connect one end of hoses
(102) to each elbow.
Connect other end of A side hose (102) to
elbow (E) of A component return tube kit.
Repeat for B side hose.
† 246978 Circulation Kit only.
◆ 24E379 Circulation Kit only.
★ 24D107 Circulation Kit only.
1. Install two return tube
kits, page 2
CAUTION
To prevent cross-contamination of fluid, mark A com-
ponent (ISO) connections with red tape. Mark B com-
ponent (RES) connections with blue tape. Do not
interchange or cross-connect A component and B
component parts.
E
102
TI15106a
106
2. Connect circulation kit
Ref.
No. Part No. Description Qty
101 KIT, return tube; see page 2 2
102 † H45010 HOSE, fluid; nylon; 1/2 in. (13 mm)
ID; 1/2 npsm(fbe); 10 ft (3.05 m)
2
◆ 262176 HOSE, B; 1/4 in. (6.35 mm) ID; (10
ft (3.05 m)
2
★ 262239 HOSE, B; 1/4 in. (6.35 mm) ID; (10
ft (3.05 m)
2
104 † 162449 NIPPLE, reducing; 1/2 x 1/4 npt 2
105 ◆ 122311 FITTING, elbow; 9/16-18 JIC 06 x
1/4 npt
2
★ 122786 FITTING, elbow; 9/16-18 JIC 06 x
1/4 npt
2
106 ◆ 124151 FITTING, 9/16-18 JIC 06 x 1/2 npt 2
★ 124152 FITTING, 9/16-18 JIC 06 x 1/2 npt 2
104
TI3510a
102
102
104
B
A
246978 Circulation Kit
24E379 and 24D107 Circulation Kit
102
105
105
102
TI15107a