Graco 257060 Paint Sprayer User Manual


 
Specifications
2 313034A
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as
cabinet shops or other “factory”, or fixed locations. If you intend to use this equipment in this type of appli-
cation, you must comply with NFPA 33 and OSHA requirements for the use of flammable and combustible
materials.
Getting Started
Fold-n-Store
Cart (ProLTS Sprayers Only)
1. Unfold handle (a) and
align as shown.
2. Tighten wingnuts (b).
3. Grasp cart handle
securely with one hand.
With the other hand lift
and pull Fold-n-Store
handle (a) located in
front of sprayer frame,
toward you. Lift up front
of sprayer until you hear
a click and the cart is
locked in place.
4. Install hose rack (d) to frame
handle. Install lock nuts.
Tighten securely.
5. Secure power cord in
clip (e) located beneath
storage compartment.
Model Name Series
Dispense
Rate gpm
(lpm)
Hose Length and
Diameter
Gun
Model
Maximum Working
Pressure
PSI MPa bar
M
AGNUM
LTS 15
A
0.24 gpm
(0.91 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
SG2 2800 19 193
M
AGNUM
LTS 17
A
0.31 gpm
(1.17 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
SG2 3000 21 207
M
AGNUM
ProLTS 17
A
0.34 gpm
(1.29 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m)
SG3 3000 21 207
M
AGNUM
ProLTS 19
A
0.38 gpm
(1.44 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m)
SG3 3000 21 207
a
b
ti9675a
c
ti9679a
d
ti9369a
ti9719a
e