Filter
Top Products
3084918
Installation/Operation
How to Flush t he Gun
WARNING
To reduce the risk of serious injury, including
splashing fluid in the eyes or on the skin, or static
electric discharge when flushing:
D Be sure the entire system, including flushing
pails, are properly grounded.
D Remove the tip guard and spray tip.
D Maintain metal to metal contact between the
gun and the flushing pail.
D Use the lowest possible pressure.
04735
Always fl ush the pump and gun before the fluid being
sprayed can dry in it.
NOTE: This procedure requires a grounded pail of
compatible solvent.
1. Relieve pressure.
2. Remove the tip guard and spray tip. Soak and
clean the parts.
3. Remove the pump intake fro m the original pail.
4. Put the pump intake in a grounded pail of compat-
ible solvent.
5. Start the pump at its lowest pressure.
6. T rigger the gun into th e original pail. When solvent
appears, re lease the trigger.
7. Now trigger the gun into the solvent pail. Circulate
the fluid until the system is thoroughly flushed.
8. Relieve pressure.