Setup
10 310692C
Connecting the fluid hose
(Pressure feed guns only)
1. To control fluid pressure to the gun, install a fluid
regulator on the fluid line.
2. Connect the fluid hose (J) to the gun fluid inlet (B)
3/8-18 npsm [R 3/8-19] compound thread.
3. Connect the other end of the fluid hose (J) to a regu-
lated fluid supply line.
Connecting the fluid supply
For packages that include fluid cups, use the following
chart for installation instructions.
Positioning the Air Cap
Rotate the air cap as needed to achieve the desired
spray pattern direction. To create a round pattern, turn
the pattern air off by turning the pattern adjustment knob
(25) fully clockwise. See F
IG. 7.
F
IG. 5
B
J
ti4854a
Cup attachment Instruction Manual
3M PPS 310693
Gravity Cup 308792
Siphon Cup 308792
Pressure Cups 308791
F
IG. 6
ti4839a