Filter
Top Products
Technical Data
312062W 49
Technical Data
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Category Data
Maximum Fluid Working Pressure Models H-25 and H-40: 2000 psi (13.8 MPa, 138 bar)
Model H-50 1 phase: 1700 psi (11.7 MPa, 11.7 bar)
Model H-50 3 phase: 2000 psi (13.8 MPa, 138 bar)
Models H-XP2 and H-XP3: 3500 psi (24.1 MPa, 241 bar)
Fluid:Oil Pressure Ratio Models H-25 and H-40: 1.91:1
Model H-50: 1.64:1
Models H-XP2 and H-XP3: 2.79:1
Fluid Inlets Component A (ISO): 1/2 npt(f), 250 psi (1.75 MPa, 17.5 bar) maximum
Component B (RES): 3/4 npt(f), 250 psi (1.75 MPa, 17.5 bar) maximum
Fluid Outlets Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports 1/4 npsm(m), with plastic tubing, 250 psi (1.75 MPa, 17.5 bar) maximum
Maximum Fluid Temperature 190°F (88°C)
Maximum Output (10 weight oil at
ambient temperature)
Model H-25: 22 lb/min (10 kg/min) (60 Hz)
Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz)
Model H-50: 52 lb/min (24 kg/min) (60 Hz)
Model H-40: 45 lb/min (20 kg/min) (60 Hz)
Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Output per Cycle (A and B) Models H-25 and H-40: 0.063 gal. (0.23 liter)
Model H-50: 0.073 gal. (0.28 liter)
Models H-XP2 and H-XP3: 0.042 gal. (0.16 liter)
Line Voltage Requirement 230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz
400V 3 phase units: 338-457 Vac, 50/60 Hz
Amperage Requirement See Systems, page 3.
Heater Power
(A and B heaters total, no hose)
See Systems, page 3.
Hydraulic reservoir capacity 3.5 gal. (13.6 liters)
Recommended hydraulic fluid Citgo A/W Hydraulic Oil, ISO Grade 46
Sound power, per ISO 9614-2 90.2 dB(A)
Sound pressure,
1 m from equipment
82.6 dB(A)
Weight Units with 8.0 kW Heaters: 535 lb (243 kg)
Units with 12.0 kW Heaters: 597 lb (271 kg)
Units with 15.3 kW Heaters (H-25/H-XP2 models):562 lb (255 kg)
Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): 597 lb (271 kg)
Units with 20.4 kW Heaters: 597 lb (271 kg)
Wetted Parts Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome,
fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically
resistant o-rings