Filter
Top Products
Displacement Pump Replacement 1095/1595/Mark V
3A0157B 35
f. Place u-bolt on pump door protrusion.
8. Ratchet pump door forward.
9. Open pump door.
10. Pull out pump pin and place in pin holder.
Installation
1. Adjust piston rod with pin holder to pull out piston
rod. Tap piston rod on hard surface to push in piston
rod.
2. Push pump collar flush with bearing housing ledge
to be able to close pump door.
3. Slide pump into connecting rod. Push pump pin until
it is fully retained.
NOTE: Pin will snap into position.
ti6375a
ti6377a
ti7327a
ti6325a
ti5492a
ti7328a
ti6378a