Filter
Top Products
Installation
313703A 3
ant provided on all fittings. Tightly clamp the hose
using side-cut or Oetiker pliers.
6. Carefully cut the air line opposite the newly installed
fittings as shown in F
IG. 5.
7. Install two clamps (3) and the tee fitting (7) as
shown in F
IG. 6. Tightly clamp the hose using
side-cut or Oetiker pliers.
8. Use a clamp to install the new hose to the new tee
fitting. Tightly clamp the hose using side-cut or
Oetiker pliers.
9. Use a clamp to install new quick-disconnect coupler
onto the other end of the new air hose. Tightly
clamp the hose using side-cut or Oetiker pliers.
10. Install quick-disconnect coupler onto the input fitting
for the breathable air system.
11. Replace breathable air system filters. See breathing
air filter system manual for instructions.
F
IG. 4: Splice Fittings Installation
F
IG. 5: Cut Location
3
3
6
5
6
NOTE: The tee fitting may have been installed in
the opposite line in some configurations.
NOTE: The tee fitting may have been installed in
the opposite line in some configurations. Cut the
air line opposite the new fittings.
FIG. 6: New Tee Fitting Install
3
3
7