Filter
Top Products
19309388
7. Turn power switch ON.
Cleanup (continued)
8. Trigger In–line Valve.
9. Turn Spray/Prime valve to SPRAY.
10. Continue to trigger In–line Valve until flushing
fluid begins to dilute paint. Then release
In–line Valve trigger.
11. Place roller frame in another bucket.
If you are flushing a non–water–based fluid, flush
until fluid coming out of roller frame is clear. Proceed
to page 25, Cleanup–Cleaning Contractort In–line
Valve Filter.
If water–based, follow Power Flushing procedure,
page 20.
12. Relieve pressure, page 6. Turn power
switch OFF.
Solvent