Filter
Top Products
Digital Tracking System (Not Available on All Units)
14 3A0156A
Digital Tracking System (Not Available on All Units)
Operation Main Menu
Short press to move to next display. Press and hold (5
seconds) to change units or reset data.
1. Turn pressure to lowest setting. Trigger gun to
relieve pressure. Turn prime valve down to DRAIN
position.
2. Turn power ON. Pressure display appears. Dashes
will not appear unless pressure is less than 200 psi
(14 bar, 1,4 MPa).
Change Display Units
Press and hold DTS button for 5 seconds to change
pressure units (psi, bar, MPa) to desired units. Selec-
tion of bar or MPa changes gallons to liters x 10. To
change display units DTS must be in pressure display
mode and pressure must be at zero.
Job Gallons
1. Short press DTS button to move to Job Gallons (or
liters x 10).
NOTE: JOB scrolls past, then the number of gallons
sprayed above 1000 psi (70 bar, 7 MPa) displays.
2. Press and hold to reset to zero.
Lifetime Gallons
1. Short press DTS button to move to Lifetime Gallons
(or liters x 10).
NOTE: LIFE scrolls briefly, then the number of gal-
lons sprayed above 1000 psi (70 bar, 7 MPa) dis-
plays.
ti13605a
-
ti14842a
ti13243a
ti4266a
psi
ti13621a
Psi
bar
Psi
MPa
ti13620a
ti13604a
Psi
ti13620a
ti13610a
ti13612a
OR
ti13601a
ti13611a
ti13617a