Graco Inc. 2030 Paint Sprayer User Manual


  Open as PDF
of 4
 
GUNS
24B327 FreeFlo Inline Gun with 4, 6, 8, 10 mm Nozzles,
18 30 Mesh Filter, RAC X 671 Tip, RAC X Guard
24B944 Pole Gun 3 ft (1 m) with 6 mm, 8 mm, 9.5 mm,
11 mm, 13 mm Nozzles, Cap,
Fine Finish Adapter
24B945 Flex Head Gun with
6 mm, 8 mm, 9.5 mm,
11 mm, 13 mm Nozzles,
Cap, Fine Finish Adapter
241705 HD Blue Texture Gun
FreeFlo Inline Gun
287227 Fine Finish Kit (includes 3 mm, 6 mm, 8 mm, 9.5 mm Spray
Discs, retaining nut and adapter)
248888 3 mm Nozzle
248524 4 mm Nozzle
248525 6 mm Nozzle
248526 8 mm Nozzle
248527 10 mm Nozzle
Pole Gun and FlexHead Gun
16A443 5 mm Nozzle
16A444 6 mm Nozzle
16A445 8 mm Nozzle
16A446 9.5 mm Nozzle
16A447 11 mm Nozzle
16A448 13 mm Nozzle
16A449 14 mm Nozzle
16A420 Cap, Nozzle–Soft
16A405 Cap, Nozzle–Medium
16A421 Cap, Nozzle–Hard
16A246 Fine Finish Adapter
Hose
24B300 3/4 in x 50 ft Fluid Hose
(with Remote on/off switch)
24B326 3/4 in x 50 ft Extension Fluid Hose
convert-a-PumP KIt
24B140 MaxLife Endurance High Pressure Pump Kit
with High Pressure Lower,
HD Blue Texture Gun, 3/8 in x 50 ft Hose,
1/4 in x 3 ft Whip Hose, RAC X 643 Tip
aDDItIonaL accessorIes
287987 25 Gallon (95 L) Texture Hopper
243380 Cam-Lock Hose Adapter–Connects
Texture Hopper to the HTX 2030
High-Output Texture Pump
24C414 Ball Valve Material Shutoff Kit
119282 Cleaning Ball (25 mm)
244052 HD Blue Texture Gun Air
Atomizer Kit with Air Hose
(Minimum air compressor rating of 15 cfm at 90 psi)
244223 HD Blue Texture Gun Air Atomizer Kit without Air Hose
(Minimum air compressor rating of 15 cfm at 90 psi)
*Nozzle size requirement could vary based on material viscosity, desired finish, production rate and air settings
Call today for product information or to request a demonstration.
800.690.2894 or visit us at www.graco.com
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
©2009 Graco Inc. Form No. 341181 Rev. A 8/09 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
HTX ACCESSORIES
NOZZLES
Nozzle Selection Guide*
Atomizer Kit shown with HD
Blue Texture Gun (not included)
TEXTURE PRODUCT SPECIFICATIONS
Nozzle
Size
Exterior
Aggregate Material
3 mm up to 1 mm (max)
4 mm up to 1.25 mm (max)
5 mm up to 1.5 mm (max)
6 mm up to 2.0 mm (max)
8 mm up to 2.5 mm (max)
9.5 mm up to 2.5 mm (max)
10 mm up to 2.5 mm (max)
11 mm up to 2.5 mm (max)
13 mm up to 2.5 mm (max)
14 mm up to 2.5 mm (max)
Nozzle
Size
Interior
Smooth Material
3 mm Fine Finish Orange Peel/Fog
4 mm Fine Finish Orange Peel/Fog
5 mm Orange Peel, Small Splatter
6 mm Orange Peel, Small Splatter
8 mm Splatter, Small to Medium Knockdown
9.5 mm Acoustics/Popcorn, Splatter, Medium Knockdown
10 mm Acoustics/Popcorn, Large Knockdown
11 mm Acoustics/Popcorn, Large Knockdown
13 mm Acoustics/Popcorn, Large Knockdown
14 mm Acoustics/Popcorn, Large Knockdown
MODEL: TexSpray HTX 2030-Complete
TexSpray HTX 2030-Complete Plus+
PART NUMBER: 258740 258741
FOR SPRAYING: For exterior aggregate and smooth
finishes as well as common
interior texture finishes such as
orange peel, splatter, knockdown
and simulated acoustic.
For exterior aggregate and smooth
finishes as well as common interior
texture finishes. Can also airlessly
apply the wide range of heavier
smooth coatings, Level 5, primers
and paints.
INCLUDES:
High-Output Piston
Texture Pump
✓ ✓
FreeFlo
™
Inline Gun
✓ ✓
3/4 in x 50 ft
(19 mm x 15 m) Hose
✓ ✓
55 Gallon Suction Set
✓ ✓
Fine Finish Kit with 1/8 in,
1/4 in, 5/16 in and
3/8 in nozzles
✓ ✓
4,6,8,10 mm Nozzles
✓ ✓
RAC X
™
671 Airless Tip
✓ ✓
MaxLife Endurance High
Pressure Airless Pump
Optional
(Pump Kit 24B140)
✓
HD Blue Texture Gun
✓
1/4 in x 3 ft (6.4 mm x .9 m)
Whip Hose
✓
RAC X 643 Airless Tip
✓
TECHNICAL SPECIFICATIONS
High-Output Texture Pump with High-Output
Texture Pump
with MaxLife
™
Endurance High
Pressure Pump
Maximum Tip Size 0.071 0.071 0.048
Maximum gpm/lpm 3.0 gpm (11 lpm) 3.0 gpm (11 lpm) 2.2 gpm (8.3 lpm)
Maximum Working
Pressure
1000 psi (70 bar) 1000 psi (70 bar) 3300 psi (227 bar)
Engine 200cc Honda
®
(6.5 hp at 3600 rpm) 200cc Honda
®
(6.5 hp at 3600 rpm)
Compressor User supplied air compressor
required for some texture finishes.
Minimum air compressor rating 25
cfm @ 90 psi (708 lpm @ 6.2 bar)
for best results
User supplied air compressor required
for some texture finishes. Minimum air
compressor rating 25 cfm @ 90 psi (708
lpm @ 6.2 bar) for best results
Weight 155 lbs (70 kg) 155 lbs (70 kg) 150 lbs (68 kg)
PUMP:
Intake QuikAccess
™
QuikAccess QuikAccess
Rod Hard Chrome Hard Chrome ChromeX
™
Cylinder Hard Chrome Hard Chrome MaxLife
™
Packings HD Poly HD Poly V-Max Blue
SPRAYER CONFIGURATIONS
 previous