Filter
Top Products
2 309511
Warnings and Cautions
EQUIPMENT MISUSE HAZARD
Misuse can cause the equipment to rupture or malfunction and result in serious injury.
To help prevent injury
D Do not modify the extension tube or roller frame or use parts not designed for this
equipment.
D Do not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon
solvents or fluids containing such solvents in this or any other pressurized aluminum
equipment. Such use could result in a chemical reaction, with the possibility of explosion.
ELECTROCUTION HAZARD
Failure to observe the electrical hazards described below could result in serious injury,
including burns or electrocution.
To help prevent harmful electrical shock
D Avoid contact with power lines.
D Follow all grounding instructions in your separate pump and gun instruction manual, and
comply with all local, state, and national fire, electrical, and safety regulations.
D Use only MAGNUM or Graco paint hoses.
FLUID INJECTION HAZARD
If high-pressure fluid pierces your skin, the injury might look like “just a cut”. But it is
a serious wound. Get immediate medical attention.
To help prevent injection
D Keep your hands and body away form the roller frame when flushing. High pressure fluid
emitted from the holes in the frame could cause an injection injury.
D Always relieve pressure before you check or repair leaks and when you turn off pump or
stop painting.
D Never use components rated less than system Maximum Working Pressure.
INSTRUCTIONS
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous
condition and result in a fire or explosion and serious injury.
To help prevent injury from fire or explosion
D Provide fresh air ventilation to avoid the buildup of flammable fumes from flushing fluids or
the coating being applied.
D Keep the application area free of debris, including solvent, rags, and gasoline.
WARNING