Filter
Top Products
17309548
11. Move gun to flushing pail, hold gun against pail, trigger gun
to thoroughly flush system.
Release trigger and put trigger safety ON.
FLUSH
12. Turn prime valve down and allow flushing fluid to circulate
for approximately 20 seconds to clean drain tube.
20 SEC
13. Raise siphon tube above flushing fluid and run sprayer for
15 to 30 seconds to drain fluid. Turn pump valve OFF. Turn
engine OFF.
PAINT
FLUSH
Caution: If flushing with water, do not leave water in sprayer. Flush again with mineral spirits, oil or Pump
Armor and leave this protective coating in the sprayer to help prevent freezing or corrosion and
increase sprayer life.