309323E
ti6623a
INSTRUCTIONS–PARTS LIST
Important Safety Instructions
D Read all warnings and instructions
in this manual. Save these
instructions.
Pressure Roller with 20”
Fixed Extension
Model 244279, Series C
D 20 in. (50 cm) heavy-duty extension
D 9 in. (23 cm) roller frame
D 1/2 in. (13 mm) nap roller cover
D 45° swivel adapter
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure
*
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar).
*
CAUTION
Never leave water in the pump, gun, or pressure roller.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armort or
mineral spirits/paint thinner.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001