24 308876
Parts
Model 965768
Hand Held Valve with Electric Switch
Aluminum wetted parts
See page 16 for illustration of items 1–44. See page 18 for illustration of items 53–63.
Ref.
No.
Part No. Description Qty.
1 626702 HOUSING, air cylinder 1
3 626068 SHAFT, air cylinder 1
4* 156454 O-RING, 010 buna-n 2
5* 551181 BEARING, air cylinder 2
6* 154662 O-RING, 222 buna-n 2
7* 552164 DOWEL PIN 1
9* 157628 O-RING, 006 buna-n 1
10 626703 PISTON, air cylinder 1
11 626704 CAP, air cylinder 1
12 552163 CLIP, internal 1.75 2
14 552161 PLATE, identification 1
15 104371 SCREW, 10–32 x 0.375 4
16*† 103610 O-RING, 014
fluoroelastomer
1
18 551188 FLUSH GREASE FITTING 2
19 626705 LUBE HOUSING 1
20*† 551191 U-CUP, urethane/EPR 1
21* 626064 BEARING, lube 1
22*† 551190 U-CUP, Polymitet/EPR 1
23n 103926 SCREW, 1/4–20 x 2.25 2
25* 185467 SEAT, C2 carbide 1
26 626706 HOUSING, fluid; aluminum 1
27*} 626062 NEEDLE, hardened stain-
less steel
1
28Y 188377 LABEL, skin injection haz-
ard
1
29Y 188378 LABEL, read instruction
manual
1
30* 626057 GASKET, air cylinder 1
31 104459 SCREW, 10–32 x 1.75 4
35* 115982 GREASE, 3 oz. tube (not
shown)
1
Ref.
No.
Part No. Description Qty.
36 551189 GUN, grease (not shown) 1
37 551187 COUPLER, flush grease
(not shown)
1
38*† 171860 GASKET, seat 1
39*† 104319 O-RING, 014 PTFE 1
40 626707 NOSEPIECE, aluminum 1
41* 626060 RING, snuff-back 1
42} 626708 SHAFT, adjustment 1
43 626709 NUT, adjustment 1
44 100166 NUT, full hex, 10–32 1
53 626055 BUSHING, handle 1
54 551204 SCREW, 3/8–16 x 3/4 1
55 626075 HANDLE 1
56 626083 TRIGGER 1
60 119156 SCREW, 10–32 x 0.8125 4
61 100020 WASHER, lock, #10 2
63 949706 SWITCH ASSEMBLY 1
* Included in Rebuild Kit 570268.
† Included in Section Seal Kit 570267.
Y Replacement Instruction and Warning Labels are
available at not cost.
} Loctite Primer N7649 and Loctite TL242, 243, or
equivalent (“blue” Loctite) should be used when
installing this part.
n Anti–seize lubricant (Loctite 56765 or equivalent)
should be used when installing this part.