Filter
Top Products
Compressor and Motor Repair
310645K 15
8 Loosen 2 shoulder bolts
about 2-3 turns. Do not
remove them.
9 Remove single shoulder
bolt on other side of
motor completely.
10 Slide out motor
assembly.
11 Completely remove
old shoulder bolts and
rubber mounts.
12 Thoroughly clean inside housing to remove dust and
debris.
Reassembly
1 Using two new shoulder
bolts and rubber mounts
included in your kit, insert
bolts into openings until
they start to snug up on
rubber mounts.
2 Slide new motor into
sprayer frame, aligning
motor frame opening
under bolts. Tighten bolts.
3 Replace shoulder bolt
on left side with new
bolt from your kit.
Tighten bolt.
4 Replace end cover.
Replace and tighten 3
screws.
5 Reattach air line to cooler
and compressor. Tighten
fitting.
ti4463a
ti4425a
ti4462a
ti4464a
ti4465a
ti4468a
ti4424a
ti4484a
ti4485a
ti4516a