Filter
Top Products
Hydraulic Oil/Filter Change
14 310778N
Hydraulic Oil/Filter Change
Removal
1. Fig. 6. Place drip pan or rags under sprayer to catch
hydraulic oil that drains out.
2. Remove drain plug (40). Allow hydraulic oil to drain.
3. Unscrew filter (47) slowly - oil runs into groove and drains
out rear.
Installation
1. Install drain plug (40) and oil filter (47). Tighten oil filter 3/4
turn after gasket contacts base.
2. Fill with five quarts of Graco hydraulic oil 169236 (5
gallon/20 liter) or 207428 (1 gallon/3.8 liter).
3. Check oil level.
FIG. 6
WARNING
Relieve pressure; page 6.
47
ti2271a