Filter
Top Products
Technical Specifications & Configurable Options
Everything you need to make an informed decision
Technical Specifications
Dimensions
Base Unit (no hoppers) ................................... 39W x 70H x 38D in (99 x 178 x 97 cm)
Side mounted hoppers ................................. 99W x 70H x 38D in (252 x 178 x 97 cm)
Rear mounted hoppers ............................... 57W x 70H x 65D in (145 x 178 x 165 cm)
Mix ratio range .............................................................. 1:1 to 10:1 (in 0.1 increments)
Ratio tolerance range ....................................................................................... +/- 5%
Fluid filtration ............................................................... 60 mesh (238 micron standard)
(not included on some models)
Flow rates
Minimum .................................................................................... 1 qt/min (0.95 lpm)*
Maximum ...................................................................................... 3 gpm (11.4 lpm)*
*Actual flow rates vary by material type
Air inlet ........................................................................................................ 3/4 npt (f)
Fluid inlets without feed kits ................................................................... 1-1/4 npt (m)
Max mixed fluid working pressure
50:1.............................................................................. 5200 psi (358 bar, 35.8 MPa)
70:1.............................................................................. 6300 psi (434 bar, 43.4 MPa)
Air supply pressure range.........................50-150 psi (3.5 to 10.3 bar, 0.35 to 1.0 MPa)
Max pump air set pressure
50:1................................................................................... 100 psi (7.0 bar, 0.7 MPa)
70:1................................................................................... 90 psi (6.2 bar, 0.62 MPa)
Max pump inlet fluid pressure ............................................... 250 psi (17 bar, 1.7 MPa)
Max air consumption at 100 psi
(0.7 MPa, 7.0 bar) ......... 75 scfm/gpm (0.56 m
3
/min/lpm)
Ambient temperature range
Operating ........................................................................... 32° to 130°F (0° to 54°C)
Storage............................................................................. 30° to 160°F (-1° to 71°C)
Weight
Base machine ................................................................................... 1160 lb (526 kg)
(No heaters, hoppers or junction box)
Fully congured ................................................................................ 1550 lb (703 kg)
(Includes heated hoppers, feed pumps, heaters and junction box)
Sound pressure .................................................... 86 dBA at 100 psi (7.0 bar, 0.7 MPa)
Fluid viscosity range ........................................................................... 200-20,000 cps
(heavier viscosities can be sprayed using heat, recirculation and/or pressure feeding)
Wetted parts
Suction tubes.............................................................................................. Aluminum
Flush pump ........................................................... Stainless steel, aluminum, carbide,
UHMWPE and PTFE
Hoses ............................................................................................................... Nylon
Pumps (A and B) ............................... Carbon steel, alloy steel, 303, 440, 17-ph grades
stainless steel, zinc and nickel plating, ductile iron,
tungsten carbide, and PTFE
Metering valves .................... Carbon steel, nickel plating, carbide, polyethylene, leather
Manifold ................................. Carbon steel, nickel plating, carbide, 302 stainless steel,
PTFE, UHMWPE
Mixer ....................................................... Stainless steel housing with acetal elements
Spray gun ................................................... Stainless steel, acetal, polyethylene, nylon,
polypropylene, carbide, polyurethane, solvent-resistant o-rings
Configurable options loaded with features
Hoppers
20-gal (76 l) hoppers are:
• Jacketed for heated water or oil
• Made of rugged,
double-wall polyethylene
• Available in heated* or standard
7-gal (26 l) hoppers are:
•
Excellent for high ratio applications
Viscon Fluid Heater*
• 240 VAC, 4000 watts
• Other voltage options
sold separately
Transfer Pumps*
• Feeds material to main pumps
• Recommended for highly
viscous materials
• Easily mounts to 20-gal
(76 l) hoppers or drums
• Choose Graco T2 or
Monark 5:1 transfer pump
Twistork Agitators
• Helps maintain proper
material consistency
• Easily mounts on 20-gal (76 l)
hoppers or drums
• Approved for use
in explosive atmospheres
5
* Models approved for explosive atmospheres are available