Filter
Top Products
S
Accessories
239631 Air Whip Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
Easier gun movement with increased hose flexibility.
Length: 4 ft (1.2 m). ID: 5/16 in (7.9 mm)
Swivel: 1/4 npsm(f), nitrile
239636 15 ft (4.6 m) Air Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 5/16 in (7.9 mm) Swivel: 1/4 npsm(f), nitrile
239637 25 ft (7.6 m) Air Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 5/16 in (7.9 mm) Swivel: 1/4 npsm(f), nitrile
239622 Fluid Whip Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
239633 15 ft (4.6 m) Fluid Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
239634 25 ft (7.6 m) Fluid Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
234784 Air Control Valve Kit (Cheater Valve) with Gauge
Small, lightweight unit attaches to any HVLP spray gun
for precise air pressure setting. 0-160 psi gauge.
235119 Gun Air Regulator Assembly
Air regulator 0-100 psi (0.7 MPa, 0-7 bar) to control
air pressure to the gun. Note: Installing the gun air
regulator adds a pressure drop that could limit the
air cap pressure.
239714 16 oz (474 cc) Gravity Cup Kit
For use with gravity feed gun. Nylon cup, 304
SST 3/8 npsm(f) fluid inlet fitting and fluid filter
cartridge included.
239715 8 oz (237 cc) Gravity Cup Kit
For use with gravity feed gun. Nylon cup, 304
SST 3/8 npsm(f) fluid inlet fitting and fluid filter
cartridge included.
240266 Disposable Polyethylene Cup Liners
1 qt (0.9 l) capacity, paint and solvent resistant.
Must be used with pressure and siphon cups.
40 liners per box.
192407 Gravity Cup Holder
239802 SST Pressure Cup with Single Air Regulator
1 qt (0.9 l) capacity, 304 SST cup. Includes a pressure
relief valve and a single cup air regulator and gauge.
Air Pressure Verification Kit
For use in checking air cap atomizing or fan air pressure at
various supply air pressures. Not to be used for actual praying.
Note: To be HVLP compliant, the atomizing air pressure must
not exceed 10 psi (70 MPa, 0.7 bar).
Orifice Size in inches (mm)
239609 0.030,0.042,0.055 (0.762,1.067, 1.397)
239610 0.070, 0.086, (1.778, 2.184)
239611 0.110 (2.790)
239612 Gravity
239803 SST Pressure Cup with Double Air Regulator
1 qt (0.9 l) capacity, 304 SST cup. Includes a pressure
relief valve, a 0-100 psi (0-0.7 MPa, 0-7 bar) air regulator
for gun atomization, and 0-15 psi (0-104 kPa, 0-1.0 bar)
air regulator for the 1 qt pressure cup air supply.
239804 Remote SST Pressure Cup
1 qt (0.9 l) capacity, 304 SST cup. Includes air pressure
regulator and gauge, 4 ft (1.2 m) length air and fluid
hose with 1/4 npsm(f) swivel ends, pressure relief valve
and rigid hook handle.
234828 Repair Kit
O-rings, fluid packings, u-cups and air valve
3M’s PPS
TM
Paint Preparation
System Accessories from Graco
6 oz (150 ml) 3M
TM
PPS
TM
234941 Cup and Collar (box of 8)
For use with gravity and siphon feed guns.
234940 Lid and Liner (box of 50)
For use with gravity and siphon feed guns.
234942 Measurement Insert (box of 50)
25 oz (650 ml) 3M
TM
PPS
TM
234771 Cup and Collar (box of 8)
For use with gravity and siphon feed guns.
234772 Lid and Liner (box of 50)
For use with gravity and siphon feed guns.
15F531 Measurement Insert (box of 100)
234837 Gravity Kit (one each: cup, collar, lid, liner, adapter)
234773 Siphon Kit (one each: cup, collar, lid, liner, adapter)
32 oz (850 ml) 3M
TM
PPS
TM
234937 Cup and Collar (box of 4)
For use with gravity and siphon feed guns.
234938 Lid and Liner (box of 25)
For use with gravity and siphon feed guns.
234939 Measurement Insert (box of 100)
15E470 3M
TM
PPS
TM
Lid Dispenser
15E469 3M
TM
PPS
TM
Liner Dispenser
15E467 3M
TM
PPS
TM
Gun Tray
15D684 3M
TM
PPS
TM
Siphon Feed Adapter
15C464 3M
TM
PPS
TM
Gravity Feed Adapter
Instruction Manual 310693