Grizzly G0442 Dust Collector User Manual


 


      

       





Bolting to Concrete Floors
       
 Figure 10     


       

Mounting to Shop
Floor
Figure11
Using Machine Mounts
Figure 11

        


NOTICE
We strongly recommend securing the
machine to the floor if it is hardwired to the
power source. Consult with your electrician
to ensure compliance with local codes.
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move the machine.
Figure10




