Filter
Top Products
Inventory
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box Inventory: (Figure 1) Qty
A.
B.
C.
D.
E.
F.
Figure 1.
Hardware and Tools (not shown)
•
Setting/Replacing
Knives
Planer knives are extremely sharp and can
quickly cause a serious injury to your hands
or fingers. Always wear heavy leather gloves
when handling these knives to reduce the
risk of cutting injuries.
Note: If you need to replace or sharpen a knife,
you can remove the knife from the cutterhead dur-
ing Step 5 of the following procedure. Thoroughly
clean out any debris from the knife slots before
replacing the knives.
Replacement knives are available through Grizzly
(refer to Page 7 for options).
Tools Needed Qty
To adjust the height of the knives:
1.
2.
Using dull or damaged knives increases
the risk of kickback and poor quality cut-
ting results. Only use sharp, undamaged
knives to prevent serious personal injury
and achieve high quality results.