Filter
Top Products
This machine must have a ground
prong in the plug to help ensure that it
is grounded. DO NOT remove ground
prong from plug to fit into a two-
pronged outlet! If the plug will not
fit the outlet, have the proper outlet
installed by a qualified electrician.
SECTION 2: CIRCUIT
REQUIREMENTS
Figure 1.
<gdjcY^c\Egdc\
8jggZci8Vggn^c\Egdc\h
5-15 PLUG
5-15 RECEPTACLE
Serious personal injury could occur
if you connect the machine to the
power source before you have com-
pleted the set up process. DO NOT
connect the machine to the power
source until instructed to do so.
110V Operation
Amperage Draw
Circuit Requirements
Plug/Receptacle Type
Figure 1