Filter
Top Products
G0472/G0473/G0476 Sandblasters
-9-
To assemble the sandblaster:
1. Install the filter assembly with the screws and
nuts (Figure 1).
G0473 Assembly
Figure 4. Light assembly.
Figure 2. Glove installation.
Figure 1. Filter installation.
2. Install the gloves as shown in Figure 2.
Figure 3. Blast gun assembly.
3. Install the bulkhead fitting with gasket. Attach
the air supply hose and suction hose to the
bulkhead fittings and suction pipe with hose
clamps (Figure 3).
4. Plug in the AC/DC adapter (Figure 4).
Seal
Washer
Bulkhead
Fitting
Washer
Suction
Hose
Supply
Hose
Suction
Pipe