Grizzly G0476 Sander User Manual


 
-8-
G0472/G0473/G0476 Sandblasters
To assemble the sandblaster:
1. Install the four legs onto the stand frame with
12 M6-1x20 screws and nuts (Figure 1).
2. Assemble the hopper assembly, the screen,
and the adhesive foam gasket in the order
shown
(Figure 2).
Figure 2. Hopper and screen assembly.
3. Set the cabinet onto the hopper and screen
assembly, and secure it with (12) M6-1 x 40
screws and nuts (Figure 3).
G0472 Assembly
4. Install the lamp and wiring with the M4-0.7 x
10 screws, washers, and nuts. Use the zip
-
ties to lock the lamp to the two lamp supports
(Figure 4).
5. Insert the air supply hose through the cabinet
grommet, and assemble the gun as shown
(Figure 5).
Figure 1. Stand frame.
Figure 3. Cabinet and frame.
Figure 4. Electrical installation.
Figure 5. Gun assembly.