Filter
Top Products
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0567
Coolant
Horsepower..............................................................................................................................................1/8 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase.........................................................................................................................................................Three
Amps............................................................................................................................................................0.5A
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Bearings........................................................................................................Shielded, Permanently Lubricated
Main Specifications:
Operation Info
Max. Dist Wheel To Table..........................................................................................................................15 in.
Max. Distance Table To Spindle Center............................................................................................ 21-1/16 in.
Longitudinal Travel...............................................................................................................................22-5/8 in.
Cross Travel...............................................................................................................................................11 in.
Spindle Dia.............................................................................................................................................1-1/4 in.
Spindle Speed....................................................................................................................................3450 RPM
Max. Grinding Length...........................................................................................................................21-1/2 in.
Max. Grinding Width...................................................................................................................................10 in.
Table Speed............................................................................................................................200 - 1000 in/min
Grinding Wheel Bore..............................................................................................................................1-1/4 in.
Grinding Wheel Diameter.............................................................................................................................8 in.
Grinding Wheel Width.................................................................................................................................. 1 in.
Downfeed Range.................................................................................................................... 0.0001 - 0.001 in.
Vertical Handwheel Graduation...........................................................................................................0.0005 in.
Vertical Handwheel Revolution................................................................................................................. 0.1 in.
Crossfeed Handwheel Graduation........................................................................................................ 0.001 in.
Crossfeed Handwheel Revolution.............................................................................................................0.2 in.
Crossfeed of Saddle Range....................................................................................................................... 11 in.
Table Info
Table Size Length...................................................................................................................................... 20 in.
Table Size Width........................................................................................................................................ 10 in.
Floor To Table Height.......................................................................................................................... 38-1/2 in.
T Slot Size Width.......................................................................................................................................1/2 in.
T Slot Size Height.........................................................................................................................................1 in.
Stud Size...................................................................................................................................................1/2 in.
Head Size..................................................................................................................................................7/8 in.
Magnetic Chuck Info
Magnetic Chuck Size Length......................................................................................................................20 in.
Magnetic Chuck Size Width....................................................................................................................... 10 in.
Construction
Table Const.......................................................................................................................................... Cast Iron
Body Const...........................................................................................................................................Cast Iron
Base Const...........................................................................................................................................Cast Iron
Spindle Bearing Type..............................................................................Shielded and Permanently Lubricated
Paint..........................................................................................................................................................Epoxy
Other
Column Size Width.................................................................................................................................9-1/4 in.
Column Size Length.............................................................................................................................12-3/4 in.
Coolant Tank Width..............................................................................................................................17-3/4 in.
Coolant Tank Length............................................................................................................................24-3/4 in.
Coolant Tank Height...................................................................................................................................12 in.
Hydraulic Tank Capacity....................................................................................................................13.55 GAL