Grizzly G0596-99 Grinder User Manual


  Open as PDF
of 32
 


Dust Collection




To connect a dust collection hose:
1. 
2. 
Figure 4

3. 
Note: A tight fit is necessary for proper
performance.
Test Run


To test run the grinder:
1.      

2. 

    Wheel Inspection 
Page 15Wheel Replacement  Page
16
3. 
4. 
5.        
ON
       


     


OFF

Page 18

Figure 4. 


FIRE AND EXPLOSION HAZARD! DO NOT
attach dust ports to a dust collection system
designed or used for wood dust collection.
DO NOT operate the Model G0596-99 without
an adequate dust collection system. This
grinder creates substantial amounts of dust
while operating. Failure to use a dust collec-
tion system can result in short and long-term
respiratory illness.
 previous next