Grizzly G0647 Saw User Manual


 
G0646/G0647 50/65 Ton Ironworker
-15-
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo
-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully
. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure
8) Qty
A. Ironworker (not shown) ...............................
1
B. Guide Bar Assembly .................................. 1
C. Extension Bar Assembly ............................ 1
D. Toolbox ....................................................... 1
E. Cap Screws M10-1.5 x 50 (Guide Bar) ....... 3
F. Lock Washers (Guide Bar) ......................... 3
G. Punch Adapter 9036 .................................. 1
H. Punch Adapter 81031 ................................. 1
I. Punch Adapter 81029 ................................. 1
J. Spanner Wrench ........................................ 1
K. Adjustable Wrench ..................................... 1
L. Grease Gun ................................................ 1
M. Hex Wrench 17mm ..................................... 1
N. Hex Wrench 14mm ..................................... 1
O. Hex Wrench 12mm ..................................... 1
P. Hex Wrench Set 2.5–10mm ....................... 1
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Figure 8. Model G0646/G0647 inventory.
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
degreaser, such as shown in Figure
9. For thor-
ough cleaning, some parts must be removed.
For optimum performance, clean all moving
parts or sliding contact surfaces. Avoid chlo
-
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac
-
es. Always follow the manufacturer’s instructions
when using any type of cleaning product.
Clean Up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent Cleaner & Degreaser
A great product for removing the waxy shipping
grease from your machine during clean up.
Figure 9. Cleaner/degreaser available from
Grizzly.