Filter
Top Products
Figure 8.
Figure 7.
A. EXHAUSTING TIME (min):
B. FILTER ROLLING TIME (sec):
C. FILTER CLEANING:
D. FILTER ROLLING:
E. OUT OF FILTER:
F. OPERATING:
G. SETTING TIME (Left Button):
EXHAUSTING TIME
Control Panels
4.
Figure 6
H. SETTING TIME (Right Button):
FILTER ROLLING TIME
I. CLEANING FILTER (MANUAL MODE)
Button: OFF
J. ON/OFF Button:
ONOFF
K. FREQUENCY DRIVE CONTROL PANEL:
Figure 6.
Note: Under both work tables exists a plas-
tic frame that insulates the machine digital
circuitry from welding current fluctuations.
The ground strap shown above must con-
nect both left and right tables. If this ground
strap is missing, loose, or is disconnected,
and the welding cable ground is connected
to the welding ground stud, the right table
will be poorly grounded and be an insufficient
ground required for quality welding results.