Filter
Top Products
"&+"
<%+,*&%?d^ciZg$EaVcZg8dbWdBVX]^cZ
Dust Collection
To connect a dust collection hose:
1. ;^ii]Z)Yjhi]dhZdkZgi]ZYjhiedgil]Zc
^i^h XdggZXianedh^i^dcZY[dg_d^ciZgdeZgVi^dc
Figure 14dgeaVcZgdeZgVi^dcFigure 15!
VcYhZXjgZ^ceaVXZl^i]V]dhZXaVbe#
DO NOT operate the Model G0675 with-
out an adequate dust collection system.
This machine creates substantial amounts
of wood dust while operating. Failure to use
a dust collection system can result in long-
term respiratory illness.
Recommended CFM at Dust Port: 400 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to cal-
culate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.
Figure 14.9jhi]dhZViiVX]ZYidYjhiedgihZi"
je[dg_d^ciZgdeZgVi^dch#
GZ[Zgidi]Z^chigjXi^dchdcPage 22Planer
Operations Setup [dg hZii^c\ je i]Z Yjhi
X]jiZ[dgeaVcZgdeZgVi^dch#
2. Ij\i]Z]dhZidbV`ZhjgZ^iYdZhcdiXdbZ
d[[#
Note: A tight fit is necessary for proper per-
formance.
Figure 15.9jhi]dhZViiVX]ZYidYjhiedgihZije
[dgeaVcZgdeZgVi^dch#