Filter
Top Products
-34-
G0677 24" Planer/Sander
SECTION 5: ACCESSORIES
ACCESSORIES
Figure 39. Sanding belt cleaning pad.
H2845 Cleaning Pads
Cleaning pads are the perfect accessory for wide
belt sanders. Simply set the conveyor table to
height and feed the pad through to “unload” a dirty
sanding belt. Regular cleaning greatly increases
the lifespan of sanding belts. Check with the cur-
rent Grizzly catalog or www.grizzly.com for more
details.
H3741 30 HP Rotary Phase Converter
Add 3-phase, multi-motor capability to your single-
phase electrical supply. Operate single or multiple
motors, transformers, and resistance loads at
100% power and 95% efficiency while saving
big dollars at cheaply metered, single-phase
electrical rates. Complete step-by-step instruc-
tions are furnished along with complete wire
and fusing requirements for various motor loads.
Each model operates up to twice its nameplate
rating in a mixed-motor load. On heavily loaded
or hard-start applications, such as high-speed
geared-head lathes and air conditioning com-
pressors, the nameplate rating of the converter
you choose should be 2 to 3 times the HP of
the most heavily loaded motor. See the individ-
ual 3-phase machine pages for phase converter
recommendations. For application assistance,
please call our technical support at (570) 546-
9663.
T20796—Indexable Carbide Inserts for Model
G0677
T21277—Front Hood for Model G0677
This dust hood allows you to replace the included
ports to consolidate dust collection hose connec-
tions. Each hood replaces 2 of the standard dust
ports. Buy 2 if replacing all the dust ports included
with the machine.
Figure 38. Rotary phase converter.
US-Made Sanding Belts for Model G0677
25"W x 60"L:
Single Pack
— G8675 60 Grit
— G8676 80 Grit
— G8677 100 Grit
— G8678 120 Grit
— G8679 150 Grit
3-Pack
— H8810 60 Grit
— H8812 80 Grit
— H8813 100 Grit
— H8814 120 Grit
— H8815 150 Grit
H9553—Wide-Belt Sander Hood
This dust hood is made to fit over the multiple 4"
dust ports on the Model G0677 planer/sander.
The base has a 1
1
⁄2" flange on all sides for mount-
ing to the sander. Port has rolled end that con-
nects to similarly sized pipe and fittings.