Filter
Top Products
Model G0704 (Mfd. Since 04/13)
-33-
SECTION 5: ACCESSORIES
ACCESSORIES
H8177—Worktable with Angle
Enjoy having an economical way to support your
workpiece at an array of angles. This high-quality
tilting worktable is quick and easy to setup and
use.
Figure 33. Worktable with angle.
Figure 32. Horizontal milling worktable.
H8179—Horizontal Milling Table
Take advantage of the G0704 mill/drill 90° tilting
headstock feature. Install this lifted cast-iron hori-
zontal milling table for the correct clearance when
making those side-milling operations.
H8179
G5684—R-8 Vertical Collet Rack
No more loose R-8 collets laying around in your
tool box. Organize with this handy collet rack and
you won’t be looking at each one for the correct
size. Set on your bench or mount to a wall. Holds
48 collets.
Figure 34. Model G5684 Tilt Table.
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777