Filter
Top Products
-16-G1004/1008 Vertical Milling Machine
The following pages contain parts diagram, parts
list and Warranty/Return information for your
Model G1004/1008 mill.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in Section
3 Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G1004/G1008 as supplied when the
manual was prepared. However, due to Grizzly’s
policy of continuous improvement, changes may
be made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the new
information to this manual and keep it for refer-
ence.
We have included some important safety meas-
ures that are essential to this machine’s opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the appropri-
ate regional Service Department listed in the
introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, metalworking magazines, and the
shelves of your local library are good places to
start. Knowledge and caution are vital compo-
nents of successful milling machine operation.
As with all powerful industrial machinery,
there is the potential for danger when using
the Model G1004/1008 Vertical Milling
Machine. Use this tool with respect and cau-
tion to lessen the possibility of operator
injury or mechanical damage. If normal
safety precautions are overlooked or
ignored, serious injury to the operator or
others in the area is possible.
SECTION 8: CLOSURE
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant
lenses, they are not safety glasses. Be cer-
tain the safety glasses you wear meet the
appropriate standards of the American
National Standards Institute (ANSI).
The Model G1004/G1008 was specifically
designed for metal machining. DO NOT MODI-
FY AND/OR USE THIS MACHINE FOR ANY
OTHER PURPOSE. Modifications or improp-
er use of this tool will void the warranty. If
you are confused about any aspect of this
machine, DO NOT use it until you have
answered all your questions. Serious person-
al injury may occur.
Commentary