Filter
Top Products
Disc Sanding
To use the sanding disc:
1.
2.
3. ON
4.
5.
Figures 60–63
Figure 61.
Always keep the workpiece on the left side of
the wheel that rotates down toward the work
table. This will keep the workpiece from fly-
ing out of your hands due to kickback.
To reduce the risk of your fingers getting
trapped between the work table and sand-
ing disc, make sure the table is approxi-
mately
1
⁄16" away from the sanding disc.
Figure 62.
Note: To prevent burning the workpiece and over-
loading the sanding disc, move the workpiece
slowly back and forth from the left side of the
sanding disc to the center.
Figure 63.
Figure 60.