Filter
Top Products
-26- G1023SL/G1023SLX Left-Tilting 10'' Table Saw
Pre-Run Check
SECTION 6: OPERATIONS
Before you begin to use your Model
G1023SL/G1023SLX Left-Tilting 10" Table Saw,
you should give it a thorough inspection. While
making your inspection, ask yourself the follow-
ing questions:
1. Are all the fasteners tight?
2. Is the blade mounted correctly?
3. Is the saw stable?
4. Is it wired properly?
5. Is your electrical system properly config-
ured?
6. Have you checked your workpiece for obvi-
ous defects?
7. Are the V-belts properly tensioned and the
pulleys properly aligned?
8. Is the guard assembly installed and func-
tional?
9. Have you checked the saw blade clearance
when it is adjusted to varying angles and
depths?
10. Have you read all the warnings and direc-
tions regarding the operation of this
machine?
Keep loose clothing out
of the way of machinery
and keep hair pulled
back.
Wear safety glasses dur-
ing all operations on the
shaper. Failure to com-
ply may result in serious
personal injury.
Disconnect power to the
machine when perform-
ing any adjustments or
maintenance. Failure to
do this may result in seri-
ous personal injury.
Always wear a dust
mask when operating
the table saw. Using this
machine produces saw-
dust which may cause
allergic reactions or res-
piratory problems.
NOTICE
The following section was designed to give
instructions on the basic operations of this
table saw. However, it is in no way compre-
hensive of every table saw application. There
are many different jigs that can be built to
increase safety, accuracy, and types of cuts.
WE STRONGLY RECOMMEND that you read
books, trade magazines, or get formal train-
ing to maximize the potential of your table
saw.