Filter
Top Products
-8- G1182 6" Series Jointers
Unpacking Piece Inventory
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts,
please refer to the detailed illustrations at
the end of the manual.
Model G1182HW (Figure2A)
• Jointer Assembly
• Fence Assembly
• Stand Assembly
• Hardware
-Hex Bolts
3
⁄8" - 16 x
3
⁄4"3
-Lock Washers
3
⁄8"3
-Allen
®
Wrench 3mm 1
-V-Belt 1
-Knife Setting Jig 1
-Hand Wheels 2
-Knob 1
-Locking Screw 1
-Flat Washer
1
⁄2" 1
-Special Nut 1
If moving this machine
up or down stairs, the
machine must be disman-
tled and moved in smaller
pieces. Make sure floor
and stair structures are
capable of supporting the
combined weight of the
machine parts and the
people moving them.
The Model G1182 series is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you’ve
signed for delivery, immediately call Customer
Service for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G1182 series is a
heavy machine, 235 lbs.
shipping weight. DO
NOT over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance. Serious personal
injury may occur if safe
moving methods are not
followed.
Figure 2A. G1182HW layout.
Figure 2B. G1182HW layout.
Model G1182HW (Figure 2B)
Same as above except the stand assembly is
replaced by a one piece cabinet stand.