Grizzly G4181 Welder User Manual


  Open as PDF
of 32
 


Changing Feed
Speed
3.   Figure 13


4. 
AB

5. 
      
ABFigure 12
6. 
Figure 12.

A

B
        

      
      Figure
12,     
Figure 13.
Always disconnect power
to the machine before
performing maintenance.
Otherwize, serious per-
sonal injury may occur!
To change the feed rate of your power feeder:
1. 0
2.    

 AB13 Ft Per Min
AB26 Ft Per Min.
AB33 Ft Per Min.
AB66 Ft Per Min.

AB9.4 Ft Per Min.
 AB18.8 Ft Per Min.
AB41.4 Ft Per Min.
 AB82.7 Ft Per Min.
Figure 13.
 previous next