Filter
Top Products
Model G0464/G0465/G0467/G0468/G0470 Air Compressors
-9-
Unpacking
SECTION 3: SET UP
Your air compressor left our warehouse in
a carefully packed crate or box. If you dis-
cover the air compressor is damaged after
you have signed for delivery, please imme-
diately call Customer Service at (570) 546-
9663 for advice.
Save the container and packing materials
for possible inspection by the carrier or its
agent. Otherwise, filing a freight claim can
be difficult.
Assembly
To assemble the air compressor:
1. Remove all packing materials and any
protective plastic bags, zip tie labels or
tags from the compressor.
2. Be sure the air filter is attached to the
cylinder head as shown in Figure 2.
Figure 3. Proper oil level.
3. Add compressor oil, or ISO 100/SAE
30W non-detergent oil, to the crank-
case. Remove the oil breather (inset
in Figure 3) on top of the crankcase
and add oil into the hole. The oil level
should be in the center of the sight
glass as shown in Figure 3 (This step
does not apply to the Model G0468).
Figure 2. Air filter attached to
cylinder head.
NOTICE
This machine should never be run
without a full oil reservoir. The oil
provides lubrication to the cylinder
rings, which deliver the compressed
air. Severe damage to the internal
moving parts can occur if there is
not adequate oil flow. Check the oil
level frequently, and change the oil
every 3 months.
Oil Breather