Grizzly G5749 Drill User Manual


  Open as PDF
of 2
 

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

MODEL G5749, G5750,
G5751, G5752, G5753
DRILL PRESS VISE
Installing the Vise
1. 

Figure 1
2. 
        

• DISCONNECT DRILL PRESS FROM
POWER BEFORE INSTALLING VISE.
• Always wear appropriate eye protection
whendrilling.
• Confirmthattheviseissecurelyfastened
tothetablebeforedrilling.
• Alwaystightenthevisefullyandensure
theworkpieceissecurebeforedrilling.
• Neverholdtheworkpiecewithyourhands
whiledrilling.
• Removechucksandothertoolsfromdrill
pressandtablebeforedrilling.
Using the Vise
1.        

2.     

3.       
Figure 2
4. 
Figure 1.
If you need help with your new drill press vise,
call our Tech Support at: (570) 546-9663.
Maintenance


       
 


Note:Cleaning the vise is best accomplished with
a vacuum, rag, or stiff brush. Using compressed
air creates an eye injury hazard and can force
chips deeper into recesses.
Figure 2.