Filter
Top Products
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G5850Z
Main Specifications:
Operation Info
Max. Cut Width...........................................................................................................................................20 in.
Max. Cut Height............................................................................................................................................7 in.
Min. Stock Length........................................................................................................................................8 in.
Min. Stock Width....................................................................................................................................... 1/4 in.
Max. Stock Thickness............................................................................................................................ 7-3/4 in.
No. Of Cuts Per Inch..............................................................................................................................67 - 102
No. Of Cuts Per Minute.............................................................................................................................20800
Cutterhead Speed..............................................................................................................................5200 RPM
Planing Feed Rate...........................................................................................................................17 - 26 FPM
Max. Cut Depth Planing Full Width......................................................................................................... 1/16 in.
Max. Cut Depth Planing 6 Inch Wide Board..............................................................................................1/8 in.
Cutterhead Info
Cutterhead Type...................................................................................................................................... 4 Knife
Cutterhead Dia.......................................................................................................................................3-1/8 in.
No. Of Knives....................................................................................................................................................4
Knife Type....................................................................................................................................................HSS
Knife Size Length....................................................................................................................................... 20 in.
Knife Size Width...........................................................................................................................................1 in.
Knife Size Thickness.................................................................................................................................1/8 in.
Knife Adjustment............................................................................................................. Gibs and Jack Screws
Table Info
Table Movement...........................................................................................................................................8 in.
Table Bed Size Length.........................................................................................................................21-1/4 in.
Table Bed Size Width...........................................................................................................................28-1/4 in.
Table Bed Size Thickness............................................................................................................................3 in.
No. Of Bed Rollers............................................................................................................................................ 2
Floor To Table Height................................................................................................................... 22-1/2 - 30 in.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Body Construction................................................................................................................................ Cast Iron
Cutterhead Assembly Construction..........................................................................One Piece Machined Shaft
Infeed Roller Construction.......................................................................................................Segmented Steel
Outfeed Roller Construction.........................................................................................................Polished Steel
Paint..........................................................................................................................................................Epoxy
Other
Table Locks.................................................................................................................................... Two Positive
Measurement Scale....................................................................................................................Inch and Metric
No. Of Dust Ports..............................................................................................................................................1
Dust Port Size.............................................................................................................................................. 5 in.
Mobile Base..............................................................................................................................................G7315
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ................................................................................. Machine Data Plate on Top of Machine
Assembly Time ...........................................................................................................................................15 minutes