Filter
Top Products
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G5962
Main Specifications:
Operation Info
Swing Over Bed................................................................................................................................... 18-1/4 in.
Dist Between Centers.................................................................................................................................60 in.
Swing Over Cross Slide..................................................................................................................... 11-5/16 in.
Swing Over Saddle.............................................................................................................................. 11-1/4 in.
Swing Over Gap...................................................................................................................................24-3/4 in.
Max Tool Bit Size......................................................................................................................................... 1 in.
Compound Travel...................................................................................................................................4-7/8 in.
Carriage Travel...........................................................................................................................................55 in.
Cross Slide Travel..................................................................................................................................8-5/8 in.
Headstock Info
Spindle Bore.........................................................................................................................................3-1/16 in.
Spindle Taper.............................................................................................................................................MT#8
No Of Spindle Speeds.....................................................................................................................................12
Range Of Spindle Speeds....................................24, 32, 55, 70, 95, 160, 240, 320, 550, 700, 950, 1600 RPM
Spindle Type.............................................................................................................................. D1-8 Cam Lock
Spindle Bearings......................................................................................................................... Tapered Roller
Tailstock Info
Tailstock Travel......................................................................................................................................4-3/4 in.
Tailstock Taper.......................................................................................................................................... MT#4
Tailstock Barrel Diameter.....................................................................................................................2-3/16 in.
Threading Info
No Of Inch Threads.........................................................................................................................................40
Range Of Inch Threads.......................................................................................................................2 - 56 TPI
Range Of Longitudinal Feeds............................................................................................... 0.0013 - 0.0352 in.
No Of Longitudinal Feeds............................................................................................................................... 40
No Of Cross Feeds......................................................................................................................................... 40
Range Of Cross Feeds.................................................................................................. 0.0006 - 0.0184 in./rev.
No Of Metric Threads......................................................................................................................................52
Range Of Metric Threads.................................................................................................................0.4 - 14 mm
No Of Modular Threads...................................................................................................................................44
Range Of Modular Threads................................................................................................................0.4 - 7 MP
No Of Diametrical Threads..............................................................................................................................32
Range Of Diametrical Threads............................................................................................................ 4 - 56 DP
Dimensions
Bed Width.............................................................................................................................................11-3/4 in.
Leadscrew TPI.................................................................................................................................................. 4
Leadscrew Length......................................................................................................................................76 in.
Steady Rest Capacity...................................................................................................................................6 in.
Follow Rest Capacity....................................................................................................................................4 in.
Faceplate Size..................................................................................................................................... 16-1/2 in.
Leadscrew Diameter............................................................................................................................. 1.245 in.
Feed Rod Diameter...............................................................................................................................0.870 in.
Floor To Center Height.........................................................................................................................45-3/4 in.
Height With Leveling Jacks........................................................................................................................ 51 in.
Construction
Base Construction................................................................................................................................ Cast Iron
Headstock Construction....................................................................................................................... Cast Iron
Headstock Gears Construction....................................................................................... Flame Hardened Steel
Bed Construction..................................................................................................Induction Hardened Cast Iron
Body Construction................................................................................................................................ Cast Iron
Stand Construction...............................................................................................................................Cast Iron
Paint..........................................................................................................................................................Epoxy