Filter
Top Products
The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2Model G7943
Other Related Information
Base Length............................................................................................................................................... 18 in.
Base Width.................................................................................................................................................11 in.
Quill Diameter........................................................................................................................................2.040 in.
Depth Stop Type.............................................................................................Threaded Rod with Positive Stop
Column Diameter.................................................................................................................................. 3.150 in.
Illumination.......................................................................................................................110V Socket, Separat
Spindle Information
Spindle Taper.............................................................................................................................................MT#2
Spindle Travel........................................................................................................................................ 3-1/4 in.
Dist From Spindle To Column...................................................................................................................... 7 in.
Dist From Spindle To Table........................................................................................................................16 in.
Dist From Spindle To Base........................................................................................................................ 23 in.
Table Information
Table Length........................................................................................................................................ 11-3/8 in.
Table Width..........................................................................................................................................11-3/8 in.
Table Thickness.....................................................................................................................................1-1/4 in.
Floor To Table Height...............................................................................................................9-1/2 - 23-1/2 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swing.......................................................................................................................................... 360 deg.
Table Tilt..........................................................................................................................Left and Right 90 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table....................................................................................................25-3/4 in.
No. Of T Slots....................................................................................................................................................4
T Slot Width...............................................................................................................................................5/8 in.
T Slot Length..........................................................................................................................................3-7/8 in.
Operation Information
Swing..........................................................................................................................................................14 in.
Drilling Capacity........................................................................................................................... 3/4 in. in Steel
No Of Spindle Speeds.....................................................................................................................................12
Range Of Spindle Speeds..................140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size.........................................................................................................................................5/8 in.
Other Specifications:
Country Of Origin ................................................................................................................................................China
Warranty ............................................................................................................................................................1 Year
Serial Number Location ................................................................................................................Data Label on Head
Awards .............................................................................. Popular Woodworking Editor's Choice Tool Buying Guide
Assembly Time ...........................................................................................................................................45 minutes
Features:
Table Has Lock Levers and Coolant Trough
Crank Handle Operated Rack and Pinion Vertical Table Movement
Threaded Depth Stop
Four T-Slots Accommodates 1/2" Clamping Kit
Includes Built-in Light
Table and Base are Cast Iron
3/4HP Motor
1/8" - 5/8" Chuck
Cushioned Grip Quill Handles