Filter
Top Products
-17-
G8144Z/G8145Z/G8146Z
Vertical Metal Cutting Bandsaw
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly’s G7895
Citrus Degreaser. To clean thoroughly, some parts
must be removed. For optimum performance
from your machine, clean all moving parts or
sliding contact surfaces. Avoid chlorine-based
solvents, such as acetone or brake parts cleaner
that may damage painted surfaces. Always follow
the manufacturer’s instructions when using any
type of cleaning product.
Clean Up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
Floor Load
Refer to the Machine Data Sheet (starting on
Page
3) for the weight and footprint specifications
of your machine. Some floors may require addi
-
tional reinforcement to support both the machine
and operator
.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figures
8–9 for the mini-
mum working clearances.
Site Considerations
Figure 8. Minimum horizontal working clear-
ances (top view).
A B C D
G8144Z
21
1
⁄4" 33
7
⁄16" 15" 28
5
⁄16"
G8145Z
15
1
⁄8" 37" 16
1
⁄2" 28"
G8146Z
19
1
⁄8" 36
3
⁄8" 27
9
⁄16" 40
1
⁄8"
Figure 9. Minimum working clearance
dimensions.
G2544—Solvent Cleaner & Degreaser
A great product for removing the waxy shipping
grease from your machine during clean up.
Figure 7. Cleaner/degreaser available from
Grizzly.