Filter
Top Products
G8598 5
1
⁄8" Cordless Trim Saw
-7-
Fig 3. Top view.
Please take the time to familiarize yourself
with the controls of your new saw. Below
are listed the names of controls and fea-
tures found on the saw and an explanation
of their function. Please refer to Fig. 3, 4 &
5.
From Figure 3:
Blade Lock: Used to lock blade when
installing or removing blades.
Saw Base Lock Knob: Used when
adjusting base height / depth of cut.
Angle Lock Knob: Used when changing
angle of cut.
Edge Guide Lock Screw: Used with
edge guide, locks edge guide to pre-
determined distance from blade.
Dust Port: The 1
7
⁄16" port helps to clear
chips from workpiece.
Guide Notch: Provides a visual guide for
following a line through a cut.
BEFORE YOU START, CONT’D