Grizzly G9741 Planer User Manual


 
-16- Extreme Duty Planers
Read the entire manu-
al before making any
cuts with your planer.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.
Once assembly is complete and adjustments are
done to your satisfaction, you are ready to start
the machine.
Turn on the power supply at the main panel.
Press the START button. Make sure your finger
is poised on the
STOP button, just in case there
is a problem. The planer should run smoothly with
little or no vibration or rubbing noises. Strange or
unnatural noises should be investigated and cor
-
rected before operating the machine further.
Run the planer for a short time to ensure that the
moving parts are working properly with no exces
-
sive vibration. If any problem develops, correct it
before attempting to use the machine.
If you cannot locate the source of unusual noises
or cannot fix any problems that arise, immediately
contact our Service Department at (570) 546-
9663 for help.
Test Run