-26-
G9742 5" x 6" Metal Cutting Bandsaw
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Lubrication
Cleaning the Model is relatively easy.
Cleaning
SECTION 6: MAINTENANCE
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
• Loosemountingbolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
• Cleanaftereachuse.
• Properbladetension.
Monthly Check
• Lubricatevisescrew.
• CheckV-Beltforwear.
Annual Check
• Inspectgearlubrication.
Figure 36
Lubricate the following areas listed below:
A. Blade Tension Mechanism:
B. Blade and Guides:
C. Gear Box:
D. Table and Machined Surfaces:
E. Vise Lead Screw:
Figure 36.