Filter
Top Products
G9744Z Metal Cutting Bandsaw
-7-
Control Panel
Figure 2. G9744Z control panel.
A
B
C
D
E
F
A. Coolant Pump Switch: Turns the coolant
pump ON
.
B. EMERGENCY STOP/OFF Button: Interrupts
power to the system and turns the motor
OFF
. Twist the button until it pops out to re-
energize the system. Also works as a stan
-
dard OFF button.
Note: The bandsaw has an automatic shut-
off (limit switch) that turns the motor and
coolant pum
p OFF at the bottom of the cut.
C. START Button: Turns the motor ON.
D. Power Light: When lit, indicates that system
is energized and machine is ready to oper
-
ate
.
E.
Feed Rate Dial: Fine tunes the feed rate by
controlling the hydraulic valve. Range is from
0 (slowest) to 9 (fastest).
F.
Feed Control Knob: Turning the knob to the
left lowers the bow at the feed rate you have
set.
Turning the knob to the right locks the
bow in position.