Filter
Top Products
G9906 7
1
⁄4" Circular Saw
-6-
OPERATIONS, CONT’D
MAKE SURE SAW IS UNPLUGGED!
1. Rotate the blade guard clockwise to
reveal the blade.
2. While holding the blade guard open,
place the saw onto a secure surface
engaging the blade teeth onto the
surface.
3. While maintaining downward pres-
sure on the saw, remove the retaining
screw and washer from the center of
the blade.
4. Note the orientation of the teeth. They
are pointed toward the leading edge
base of the saw. Be careful to avoid
touching the saw teeth and slip the
blade out of the saw.
5. Ensuring the teeth on the new blade
are in the correct orientation, slide the
blade into the slot on the bottom edge
of the closed blade guard.
6. Carefully center the blade over the
arbor and replace the washer and
retaining screw.
7. Tighten the retaining screw in the
same manner as it was removed.
Saw blades are sharp. Use care when
handling. Blades may cut or nick fin-
gers or hands causing lacerations,
disfigurement or disability.
Changing Blades