Filter
Top Products
G9911 9" Angle Grinder
-5-
Your G9911 will give you years of trouble
free service if you keep it clean and free of
built-up dust or grime. Ensure that no air
passages get blocked. If they do, blow
them out with compressed air. WARNING:
Wear safety glasses when cleaning tool
with compressed air.
Plastic parts can easily be cleaned with a
damp cloth, but never use water to clean
any electrical parts. Solvents should also
be avoided on plastic because of the pos-
sibility of damage.
Regular periodic maintenance on your
G9911 will ensure its optimum perfor-
mance. Make a habit of inspecting your
sander each time you use it. Check for the
following conditions and repair or replace
when necessary:
1. Loose fasteners.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Any other condition that could ham-
per the safe operation of this
machine.
Since this tool is encased in a double insu-
lated plastic cover, leave repair and ser-
vice issues to a qualified service techni-
cian. This includes brush replacement,
lubrication or any other internal operation.
Be aware of the surrounding conditions.
Do not use the grinder in the rain, snow or
near flammable gas and vapors.
MAINTENANCE
Keeping Tools Clean
Maintenance
Like all power tools, there is danger
associated with the Model G9911.
Accidents are frequently caused by
lack of familiarity or failure to pay
attention. Use this tool with respect
and caution to lessen the possibility of
operator injury. If normal safety pre-
cautions are overlooked or ignored,
serious personal injury may occur.