Grizzly H0800 Heat Gun User Manual


 
STRIPPING OF PAINT, VARNISH
Drying out paint and varnishes or wet, damaged timber prior to filling with compound
and refinishing.
Softening old putty before removal and replacement.
Shrinking PVC shrink-wrap sheeting for packaging protection, polyvinyl wire joints and
tubing.
Waxing and/or dewaxing skis.
* Keep the air intake and outlet opening clean and free of dirt and debris.
* Do not use gasoline, lacquer, turpentine or similar substances to clean the tool or
work piece. Do not immerse any part of the heat gun into a liquid or let any liquid
inside the gun.
NOTE: This tool is designed with a built-in stand so it can be put on any flat surface in
an upright (vertical) position which will free your hands to easily shape or mold PVC
pipes and other similar materials. Always remember to avoid contact of hands or face
with stream of hot air when using the gun in any position.
Do not immerse in water! This will create a serious electrical shock resulting in injury
or death.
If you need service or help with this machine, please contact our
service department at (570) 546-9663 for technical assistance, repairs,
or replacement parts.
DON’T FORGET TO VISIT US ON THE WORLD WIDE WEB AT
www.grizzly.com.
IMPORTANT
OTHER JOBS
SERVICE
4