Filter
Top Products
H2912/H2913 2-IN-1 NAILER/STAPLER -4-
INTRODUCTION
Commentary
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H2912/H2913 2-IN-1 Nailer/Stapler. This
model is part of a growing Grizzly family of
fine power tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoy-
able operation and proof of Grizzly’s com-
mitment to customer satisfaction.
The Model H2912/H2913 features 360˚
adjustable exhaust, a convenient bottom-
loading magazine, a safety trigger and a
durable plastic carrying case. The Model
H2912 can shoot
3
⁄8"-1
1
⁄4", 18 GA brad
nails and
5
⁄
16"-1
1
⁄
4",
1
⁄
4" staples. The Model
H2913 can shoot
1
⁄4"-2", 18 GA brad nails
and
5
⁄6"-1
9
⁄16",
1
⁄4" staples.
We are pleased to provide this manual
with the Model H2912/H2913. It was writ-
ten to encourage safety considerations
and guide you through general operating
procedures and maintenance. This manu-
al represents our effort to produce the best
documentation possible.
The specifications, details, and pho-
tographs in this manual represent the
Model H2912/H2913 as supplied when
the manual was prepared. However,
owing to Grizzly’s policy of continuous
improvement, changes may be made at
any time with no obligation on the part of
Grizzly. If you have any comments regard-
ing this manual, please write to us at the
address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Read the manual before assembly
and operation. Become familiar with
this tool, its safety instructions, and
its operation before beginning any
work. Serious personal injury may
result if safety or operational infor-
mation is not understood or followed.